Видео

Que buena experiencia gracias.

Thanks! Beautiful cat!

FOR FUCK SAKES, to replace a fiddy dollar part. why put yourself through the toucher. whom in their right mine would shove a petty part where it shouldn't be at the first place, ,,,,,,

I also have the same problem that it produces a lot of smoke where yours also produces I hope you can help me solve this problem thank you

Good afternoon, a question. I have this same tractor. I have the same problem. I hope you can help me solve the problem. Look, mine also has carburetor problems, but you see, it also takes off.

Thanks for close up of H & L adjustment screws

live in central america ,365 days are 90´s is ok to remove the thermostat only, not install new one? I live Newark NJ had Crown Vic , never install a new thermostat. the only thing once in while i had the check engine light. that was not to often

Remember the good old days when the thermostat was sticking out of the front of the motor and you'd have to undo 2 x 10mm bolts to change it out.

I purchased one! Then, after great performance, I purchased the Earthquake Rototiller with the reverse wheel lever; making easy to back-up. Therefore, I am extremely happy with these purchases. Both machines work as I expected. Now, I would like to find a machine like the former “Yazoo” blade (brush-hog) mower! Oh! And these Chinese made engines have proven to be as good as “USA” Briggs & Stratton engines; which are now made in China. Zoom, Zoom y’all ! 😊

Similar problem I'm facing now. Mine will be slightly more difficult though. Good job getting it tightened up. The thing with the hinge seemed like a pain in the watusy to me. ✌️

Excellent. Thank you for sharing.

Thanks, does this use the regular 87 unleaded gas? dont want to screw mine up lol

i had a problem with the wheel bearings but got 10 of them at amazon for $12 which work well.. great machine, i have about 180 hours on mine as i do hiking trails with it.......mine has the viper engine... starts all the time... love it.....

Holy crap all that work just to replace one dumb part I hate cars

I replaced the propane fridge in my sons trailer with a fridge just like the one you have. Fit in the spot nice and tight. Getting the propane fridge out the door of the trailer was a PITA. I had to remove the trim from the fridge. That shit is glued on with some super strong glue. I have since sold that trailer. The trailer I live in, the propane fridge broke about a 6 months ago. I have not removed it yet but I do have a fridge that is way too big(double the size) to fit where the old was was. It takes up a bit of room but it sure is nice to have double the space in the fridge.

Charge time? 1.5hrs. Found one of these, on the side of the interstate. Not charged, with no strap... Trying to charge it, as i watch this video. - Has the weird, micro usbc recharge battery. None of the lights, on the battery work.

A good company treats every customer as valuable.

I strongly caution against buying the predator 9000 generator.

Are you installing a First Flush system - I'm looking into how to build one right now. Try to keep as much dirt out of the catchment system as we can.

I am looking into getting heating coils to line the last 3" of the roof which we can use to heat the last bit of edge (snow melt zone) in the winter. I'll have to size it to keep the battery bank up. You are way ahead of us!!

Water collection is paramount. I was able to get up on the mountaintop Thursday and Friday and get the CASE Backhoe Loader back up and operating - trying to dig footers for the 30'x40' Steel Canopy. Great Job, Brother!! Hoping you get every drop of water to fill your tanks!!

I didn’t hear that part. I’m sorry. I have over 30 years experience building off grid solar systems and I live off grid and I know how to do a lot of incredible things with direct current and batteries and I love people that are into solar. If I could save you any trouble, I will definitely offer my advice. I have 11 kW of solar and 34 kWh of battery and I have like six charge controllers paralleled to my main direct current bus. Good luck and happy YouTubing!

Hello I didn’t watch the entire video so maybe you addressed this but the charge controllers should have adequate ventilation available as they get warm when running and the fans will be starving for air if it’s a sealed box. Just a suggestion but I would cut some vents in on the underside and also on the back near the top. The small 2” diameter round vent covers would work. Two on underside and two on the back near the top.

Epever charge controllers are not supposed to be horizontal. They are supposed to be mounted vertically on the wall so that the heat can convict upwards. Also, your mounting location is far too small for that equipment. It will overheat for sure. Plus the breakers will start cooking.

If you have the space, used panels on a ground mount are definitely the way to go. It's going to be a nice system when you're done.👍

Thanks Wind. We're about to fix ours and will order parts based on your experience and vid. This is project son and I are working on. Excellent vid.

I gave you a thumbs up but it isn't showing up... I can never comprehend why these algorithms never work...

Looking Great!!

Wow harem 3eltak

Thanks for speaking with me through the IFLA forum!

That EPEVER 80A is actually rated at 138V VOC. Its 150V at the "lowest temperature" you would experience. But solar panel labels are generally for nominal conditions so the 37V VOC on the solar panels x 4 = 148V, is too high. In cold temperatures the VOC of that solar string can easily exceed 150V. You will need to reconfigure the string a bit. I would consider paralleling two strings of 2 panels each. Buy a little solar combiner box to parallel the two strings together. I really like the little "Eco-worthy 4 string PV combiner" boxes. Check the fuse rating for the strings... I think that combiner box comes with 10A fuses, you might need 15A fuses with residential panels. But usually 10A is fine (per string). I don't recommend sitting the charge controller or batteries or anything else on the ground. Those are a bit too-exposed to the elements. Consider making a box for the equipment, with a solid lid, that won't let any water in that you can raise off the ground a bit. It's best to have a sealable box to reduce moisture issues but anything is better than sitting the equipment on the ground. Moisture can ruin the breakers, inverter, charge controller, etc. It won't last when exposed like that. -Matt

Good job ! "good enough for now" 👍

So... Ugh, all the math... Lol!

Hope Harbor Freight gets, You a predator with no problems this time! Thats a lot of Brazs too be Hauling back in the Snow storm! I HAVE not Heard people having any problems with this 9000 Predator??? & this is the "4 time Your returning One?? Because it Wont start & leaking Oil??? I hate Hearing that too! So Hang in there with it Sir!!

Very nice, wasn't sure how the hole thing worked. BUT!!! I found a way to strengthen the sandpaper but using reinforced packaging tape, running strips of the tape across the back of the sandpaper. It really works to keep the paper from shredding or falling apart too soon.

Excellent, thank you! Needed help with the adjustments, and this was most helpful

what fuel are you running? e85? alcohol free? stabil or injector cleaner? how many hours did it have?

C or F?

Woke up tis Morning and it was -32

Hello I'm new from jamaica mines need motor where can i get dem😢

I know this is an old vid. However, I love my o lights! I have a few coasts with no failures. they are decent for the lower cost. the newer hp3r 385 lumen version is supposedly improved. those are there penlights I use at work

kind of an old video, but how has this lasted in the long run? i love the G19 but it only lasts a few months before i need it replaced. I use these lights all day as a mechanic so they tend to take a beating

I’ve been abusing my pen light for almost 10 years. It’s a stream light stylus pro. The new stream light micro stream is rechargeable and does 250 lumens. Streamlight has a clone of the Hp3r in the form of a stylus pro rechargeable plus sized. I’ve had nothing but good experiences out of streamlight. I just bought an hp3r. Hopefully it lasts for me. I’ve also run an olight eos 2. Pretty good edc light for the money. 18.99

If I recall when I replaced mine,98, there was a smaller o ring as well that caused a leak resulting in doing the job twice. I remember when we changed our thermostats twice a year,winter and summer and it was a 15 minute job. Also consider checking ECT sensor. Engine coolant temperature sensor. That’s what my problem was to begin with. 5 different mechanics didn’t discover the problem because it didn’t show up on any code readers.

Thank you for your review, it helped a lot!

How does the choke cable go in? This is my last step and I don't wanna fuck it up.

Toro, sold by Amazon, has a Briggs engine and is about the same price. Rural King, Lowes, Tractor Supply and Troy Built all have string trimmers. I did videos on this trimmer @ T wagner RUclips with the Viper engine.

Can you tell me the size of the sandpaper that fits into the sander? Iknow it's 1/3 sheet, but how many inches?

thanks for the video. it is very helpful. But the background music is not necessary